Command and Processes - S
For more information on the terms 'Command', 'Process' and 'Macro Command', see Command Table Introduction.
These tables list all commands and processes available in all products. If your product has access to a command or process, the link on the left of the table takes you to a dedicated help file for more information. If no link appears, the function isn't available in your product.
Symbols used in this table:
A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.
X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).
� A blue diamond indicates the module is an optional extra for the specified system.
For Macro commands, see here.
Commands - S
Command Name |
|
|
|
|
|
|
|
|
|
Description |
More Help |
|
|
|
|
|
|
|
|
|
Saves the current view plane parameters to a section definition file. |
Command Help | |
|
|
|
|
|
|
|
|
X |
Interactive command to scale a wireframe on one or more axis directions. Scales about a point which can be the wireframe center or its centroid, or a user-defined point. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Define how field values are treated when mining units are scheduled. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Control of scheduling face progression. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Select all mining blocks for scheduling. |
||
|
|
|
|
|
|
|
|
|
Selects all displayed static drillholes objects data. |
Command Help | |
|
|
|
|
|
|
|
|
|
Selects all displayed ellipsoid data. |
Command Help | |
|
|
|
|
|
|
|
|
|
Selects all displayed static planes objects data. |
Command Help | |
|
|
|
|
|
|
|
|
|
Selects all displayed points objects data. |
Command Help | |
|
|
|
|
|
|
|
|
|
Selects all displayed points objects data. |
Command Help | |
X |
X |
X |
X |
X |
|
X |
X |
X |
Select drive cross-sections for underground mine design. |
||
|
|
|
|
|
|
|
|
|
Displays the Custom Cursors dialog. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles Off the inclusion of drillhole data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles On the inclusion of drillhole data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles the inclusion/exclusion of drillholes data during data selection commands. |
Command Help | |
X |
X |
|
|
X |
X |
X |
X |
X |
Define a new mining face. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Select and define a face mine unit, or activate a mine tonnage zone. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Select mining blocks for scheduling and blending. |
||
|
|
|
|
|
|
|
|
|
Toggles Off the inclusion of block model data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles On the inclusion of block model data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles the inclusion/exclusion of block model data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Select a closed string to make it the current string. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles Off the inclusion of plane data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles on the inclusion of plane data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles the inclusion/exclusion of plane data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles Off the inclusion of point data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles On the inclusion of point data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles the inclusion/exclusion of point data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Select points to modify the selected data set. |
Command Help | |
|
|
|
|
|
|
|
|
|
Select/deselect a string for further operations. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles Off the inclusion of string data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles On the inclusion of string data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggles the inclusion/exclusion of string data during data selection commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Select string data based on its distance 'into' the screen |
Command Help | |
|
|
|
|
|
|
|
|
X |
Select the current wireframe group and surface prior to linking. |
||
|
|
|
|
|
|
|
|
X |
Toggles Off the inclusion of wireframe data during data selection commands. |
||
|
|
|
|
|
|
|
|
X |
Toggles On the inclusion of wireframe data during data selection commands. |
||
|
|
|
|
|
|
|
|
X |
Toggles the inclusion/exclusion of wireframe data during data selection commands. |
||
|
|
|
|
|
|
|
|
|
Use an unrotated rectangular boundary data selection method. |
Command Help | |
|
|
|
|
|
|
|
|
|
Command Help | ||
|
|
|
|
|
|
|
|
|
Select data using a point-to-point line boundary of variable width |
Command Help | |
|
|
|
|
|
|
|
|
|
Activates a series of sequence numbers in relation to a specific object attribute, to be used in other processes (e.g. scheduling, visualizer animations etc.) |
Command Help | |
|
|
|
|
|
|
|
|
|
Set grade field and cut-off grade for adjusting a string to an ore boundary using a block model. |
Command Help | |
|
|
|
|
|
|
|
|
|
Toggle between using the cut-off grade or legend items methods when using the adjust-string-in-ore command. |
Command Help | |
X |
X |
|
|
X |
X |
|
|
X |
Specify an attribute (field) in the current object to control offsets and offset angles. |
||
X |
X |
|
|
X |
X |
|
|
X |
Define berm width for road design. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Set calendar for production scheduling. |
||
|
|
|
|
|
|
|
|
|
Set primary and secondary clipping limits for the Design window. |
Command Help | |
X |
X |
|
|
X |
X |
X |
X |
X |
Set default destination for scheduling category. |
||
|
|
|
|
|
|
|
|
|
Set the rock or material 'default' density for the project. |
Command Help | |
|
|
|
|
|
|
|
|
|
Used to set other design parameters. |
Command Help | |
|
|
|
|
|
|
|
|
|
Modify parameters for compositing and/or evaluation of drillholes. |
Command Help | |
X |
X |
|
|
X |
X |
X |
X |
X |
Set clipping limits for shading of unscheduled blocks. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Set the advance method for mining faces. |
||
|
|
|
|
|
|
|
|
|
Set the string projection angle i.e. face angle, for using in the open pit road design tools. |
Command Help | |
|
|
|
|
|
|
|
|
|
Write an attribute field to a file type. |
Command Help | |
|
|
|
|
|
|
|
|
|
Set gradient unit and direction conventions for design commands. |
Command Help | |
|
|
|
|
|
|
|
|
|
Set near (out of screen) and far (into screen) clipping limits. |
Command Help | |
|
|
|
|
|
|
|
|
|
Define the selected evaluation legend categories as ore or waste. |
Command Help |
|
X |
X |
|
|
X |
X |
X |
X |
X |
Specify format of figures shown in scheduling panels. |
||
X |
X |
|
|
X |
X |
X |
X |
X |
Define slope regions and rosettes within your open pit project. |
||
|
|
|
|
|
|
|
|
|
This command is used to set the distance that a string will be projected when the project-string-at-angle command is called. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Set segment length to be used when making ramps. |
||
X |
X |
|
|
X |
X |
|
|
X |
Set the inverse power of distance used for weighting rosette values. |
||
|
|
|
|
|
|
|
|
|
Set the view exaggeration (but not the underlying data) for the X, Y and/or Z axes of the Design or 3D window. |
||
|
|
|
|
|
|
|
|
|
Set the snapping grid's origin and spacing parameters. |
||
|
|
|
|
|
|
|
|
|
Set snap mode to snap to grids. |
||
|
|
|
|
|
|
|
|
|
Set snap mode to snap to object lines. |
||
|
|
|
|
|
|
|
|
|
Enables the use of snapping to the grid during data selection and digitizing. |
||
|
|
|
|
|
|
|
|
|
Disables the use of snapping during data selection and digitizing operations. |
||
|
|
|
|
|
|
|
|
|
Sets snap mode to snap to object points. |
||
|
|
|
|
|
|
|
|
|
Set snap mode to snap to object surfaces. |
||
|
|
|
|
|
|
|
|
|
Set the step distance for string adjustment when outlining ore using the adjust-string-in-ore command. |
||
|
|
|
|
|
|
|
|
|
Change the view to the previous view orientation in the Design window. |
||
|
|
|
|
|
|
|
|
X |
Set matching tolerance for points to be used in the DTM. |
||
|
|
|
|
|
|
|
|
|
Define the define increments used in Underground Blast Design. |
||
|
|
|
|
|
|
|
|
|
Shows or hides a previously-selected background image in the Design window. |
||
|
X |
X |
X |
X |
X |
X |
X |
X |
See which samples contributed to the estimation of a parent cell |
||
|
|
|
|
|
|
|
|
|
Show the Project Settings dialog |
||
|
|
|
|
|
|
|
|
|
Show the system Options dialog |
||
|
X |
X |
X |
X |
X |
X |
X |
X |
See which samples contributed to the estimation of a sub-cell |
||
|
|
|
|
|
|
|
|
X |
Display a temporary line at the intersection of the current wireframe and thecurrent viewplane. |
||
|
|
|
|
|
|
|
|
|
Smooth part of a string to a consistent gradient. |
||
|
|
|
|
|
|
|
|
|
Smooth part of a string to a consistent gradient. |
||
|
|
|
|
|
|
|
|
|
Toggles the mechanism for snapping to data. |
||
X |
X |
X |
X |
X |
X |
X |
X |
|
Toggles if map face data (only) can be used as a snapping point. |
||
|
|
|
|
|
|
|
|
|
Disables snapping of the cursor to drillhole data. |
||
|
|
|
|
|
|
|
|
|
Enables snapping of the cursor to drillhole data. |
||
|
|
|
|
|
|
|
|
|
Toggles snapping to drillhole data On/Off. |
||
|
|
|
|
|
|
|
|
|
Snaps the currently active string to the mid-point of another selected string segment. |
||
|
|
|
|
|
|
|
|
|
Toggles on or off snapping to the active string to a perpendicular of another, string (if possible). |
||
|
|
|
|
|
|
|
|
|
Move the current view plane to a parallel plane through a point. |
||
|
|
|
|
|
|
|
|
|
Disables snapping of the cursor to plane data. |
||
|
|
|
|
|
|
|
|
|
Enables snapping of the cursor to plane data. |
||
|
|
|
|
|
|
|
|
|
Toggles snapping to plane data On/Off. |
||
|
|
|
|
|
|
|
|
|
Disables snapping of the cursor to point data. |
||
|
|
|
|
|
|
|
|
|
Enables snapping of the cursor to point data. |
||
|
|
|
|
|
|
|
|
|
Toggles snapping to points data On/Off. |
||
|
|
|
|
|
|
|
|
|
Disables snapping of the cursor to string data. |
||
|
|
|
|
|
|
|
|
|
Enables snapping of the cursor to string data. |
||
|
|
|
|
|
|
|
|
|
Toggles snapping to strings data On/Off. |
||
|
|
|
|
|
|
|
|
|
Disables snapping of the cursor to wireframe data. |
||
|
|
|
|
|
|
|
|
|
Enables snapping of the cursor to wireframe data. |
||
|
|
|
|
|
|
|
|
|
Toggles snapping to wireframe data On/Off. |
||
|
|
|
|
|
|
|
|
|
Draws a square with a center point and a corner point selected interactively in the 3D window. |
||
|
|
|
|
|
|
|
|
|
Draws a square with a center point and an edge point selected interactively in the 3Dwindow. |
||
|
|
|
|
|
|
|
|
|
Draws a square with two opposite corner points selected interactively in the 3D window. |
||
|
|
|
|
|
|
|
|
|
Draws a square with a side length defined by selecting points on opposite edges interactively in the3Dwindow. |
||
|
|
|
|
|
|
|
|
|
Toggles status panel display when your application is started up. |
||
|
|
|
|
|
|
|
|
|
Create strings (e.g. road strings) to climb/descend a wireframe surface with a maximum gradient constraint. |
||
|
|
|
|
|
|
|
|
|
Show/Hide all strings objects data. |
||
|
|
|
|
|
|
|
|
|
Hide all strings objects data. |
||
|
|
|
|
|
|
|
|
|
Show all strings objects data. |
||
|
|
|
|
|
|
|
|
|
Convert a string to a drillhole. |
||
|
|
|
|
|
|
|
|
|
Create plane data based on the vertices of a selected string object. |
||
|
|
|
|
|
|
|
|
|
Creates a road outline from a highlighted single road design string. |
||
|
|
|
|
|
|
|
|
|
Draws a new string from intersecting portions of strings selected interactively in the active window. |
||
|
|
|
|
|
|
|
|
|
Superimpose a plot file on the Design window |
||
|
|
X |
X |
X |
X |
X |
X |
X |
Create a contact surface by specifying whether categorical values lie above or below the surface. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Displays the Add to Database panel to modify the contents of the Studio Survey database |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Launches the Blasts Summary reportingtask. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Launches the Pit Excavation Boundary task. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Launches the Stockpile Excavation Boundary task. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Collate PDF reports using the Combine Reports task |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Create a drive solid from input surveyed string data. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Launches the Survey Import Module, which is used to connect Studio Survey to external Studio equipment data (e.g. Leica). |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Displays the Publish panel for EOM report generation. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Launches the Run Batch command. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Create a drive solid from input surveyed string data. |
||
X |
X |
X |
X |
X |
X |
|
X |
X |
Displays the Database Settings panel for Studio Survey database configuration. |
||
|
|
|
|
|
|
|
|
|
Toggle between Pixel Line and Points drillhole overlay rendering modes. |
||
|
|
|
|
|
|
|
|
|
Switch triangulation between a pair of triangles |
||
|
|
|
|
|
|
|
|
|
Interface to the operating system. |
Processes - S